Bad gas from your motorcycle can cause concern if you do not know how to use or fix it properly. You don’t have to worry about bad gas fixation if you know it properly. Don’t worry about bad gas, think about it and find out how to get your motorcycle out of this problem.
Bad gas can slow down your motorcycle. It is also a harmful aspect of your bike that you need to keep in mind. If you do not get rid of it in time, the vehicle will be damaged.
I hope you find the solution to all your bad gas problems here. By sharing your experience, you will find everything you need to know in this article. So let’s start a detailed discussion.
2 Simple Ways To Fix Bad Gas In A Motorcycle: Choose The Suitable One
You can follow these 2 simple ways to fix bad gas in your motorcycle. Here are more details about them.
1. With Vacuum Petcock:
Vacuum Pitcock is one of the tools that can be used to make bad gas drainage work easier. Petcock connects to the carburetor of the tank. Place the hose before turning on the petcock. The process is comparatively easier than the other process without a vacuum petcock. So, try to follow this one.
2. Without Vacuum Petcock:
Now the next option is without a vacuum petcock. This is also a good way but you have to do it differently. In this case, you have to do it with a siphon pump. So, you have to know the right use of the siphon pump. Its price range would be up to $9 – $16.
3 Simple Steps To Fix Bad Gas In A Motorcycle With The Vacuum Petcock
Today, I am going to share with you how to fix the bad gas of my motorcycle and save the motorcycle from damage by doing drainage work. Let’s see the 5 easiest steps to drain bad gas in your motorcycle. This way saves your valuable time and you enjoy doing that.
Step-1 Make Sure That It’s Time To Drain:
Before draining, check that it is time to drain the bad gas. Do you know about bad gas? You can recognize bad gas by keeping the bad gas and the bad inside your motorcycle side by side.
Good gas, of course, is fresh, pure, and transparent. And a lot of bad gas is cloudy and opaque. By comparison, you can see for yourself which is good and which is bad. Then try to get some gas out of your motorcycle first.
If the test shows that the gas is already bad, it is time to drain. Then work on the drain. And if you see that the gas is fresh, like a good gas, then you are free from the hassle of working the drain.
Step-2 Arrange The Necessary Tools:
If you notice the presence of bad gas in the gas storage, you have to collect the drainage tools. Don’t need too many tools. However, this work cannot be done without some basic tools. Below is a description of what tools are needed.
- Vacuum Petcock:
This is needed to drain the bad gas with a vacuum petcock. It makes your motorcycle draining job hassle-free. You can know the activity of a petcock from the next step.
- Container:
A container will be needed to get the bad gas out of the motorcycle tank. You can also use other pots as an alternative. However, it is better to use a container to extract the gas through the pipe. However, if you do not have a container at hand, use another container. Setting it lower than the tank.
- Draining Line:
It is most needed to get the bad gas out of the tank. It is impossible to drain bad gas without it. So it is important to collect. Collect a pipe so that it makes the job much easier for you.
- Gloves:
You can use gloves because it is never a good idea to get bad gas on your hands. It causes harmful conditions to the skin. So try to use gloves.
Step-3 Time To Drain:
Now it’s time to drain bad gas in a motorcycle with the vacuum petcock. Take a container or a suitable container to hold bad gas. Place the container below the motorcycle tank. Now take a pipe or fuel line. Fit it into the nipple of Petcock to get out the bad gas.
Turn on the gas tanker. Did you notice? There is no gas flow from the fuel line. So to create a bad gas flow you need to take the help of a Vacuum Pitcock. Turn off the switch of the gas tanker again. Find the nipple from the outside of the dia frame. The one inside is gonna be before the atmospheric pressure.
Connect with the nipple. Now you can back up your pump. Here’s the flow level up in the diaphragm. Test by increasing the level with folding pressure. Now switch on the gas in the tank. Bad gas came out of the gas tank. You were surprised and the job was done easily.
3 Steps To Fix Bad Gas In Motorcycle Without The Vacuum Petcock
The following steps will help you fix bad gas more efficiently if the process of fixing it with the vacuum petcock is difficult for you:
Step-1 Make Sure That It’s Time To Drain:
Before draining, check that it is time to drain the bad gas. Do you know about bad gas? You can recognize bad gas by keeping the bad gas and the bad inside your motorcycle side by side.
Good gas, of course, is fresh, pure, and transparent. And a lot of bad gas is cloudy and opaque. By comparison, you can see for yourself which is good and which is bad. Then try to get some gas out of your motorcycle first.
If the test shows that the gas is already bad, it is time to drain. Then work on the drain. And if you see that the gas is fresh, like a good gas, then you are free from the hassle of working the drain.
Step-2 Arrange The Necessary Tools:
If you notice the presence of bad gas in the gas storage, you have to collect the drainage tools. Since you do not use a vacuum petcock, in this case, you have to use a siphon pump instead of a vacuum petcock.
A siphon pump is also easy to use in your motorcycle tank. With the help of this pump, you can do drainage work easily. So don’t worry if you don’t have a vacuum petcock or you can’t arrange it. In the next step, you will know the usage rules and how to drain through them. Earlier mentioned safety tools are required as well.
Step-3 Time To Drain:
An easy way to get rid of bad gas is by using a siphon pump. You can get the job done in just a short time. Give some direction. Take the siphon pump in hand. You will see an arrow mark on the pump.
That’s a point to the direction you insert the pipe into the gas tank. Now place the other end of the pipe in the container. Pump in such a way that gas flows. You will notice that the bad gas of your motorcycle is coming out automatically.
Watch out for the siphon design flaw. The plastic cap ends with the hand pump slipping off. Don’t let these caps fall into your motorcycle tank or fall into your gas can.
You can also get out bad gas with siphon fuel. However, it will not have a pumping system. You place one side of the siphoned fuel in the gas tank so that part of the pipe sinks into the gas. Put the stock on the other side. Be careful that the gas stops coming up to half of the pipe.
When more than half of the gas is gone, take it out of the mouth and put that side inside the container. What work has been done? This way you can get the bad gas out without pumping.
The Effects Of Bad Gas On Your Motorcycle:
Bad gas can cause considerable damage to the motorcycle. So it is best to fix the bad gas as quickly as possible. Now let’s see what bad gasses can do to your motorcycle.
Bad gasses can disrupt the regular activity with your motorcycle. reduces the speed of the motorcycle If the gas used in your motorcycle is mixed with gasoline-ethanol then good gas can be quickly converted to bad gas. This can also cause engine problems.
Tricks That Can Be Applied To Drain Bad Gas From A Motorcycle Easily:
There are many tricks you can apply that will make your dining work hassle-free. For example, if you want, you can open the tank of your motorcycle with the seat and keep it in a convenient place to drain the gas. This will make your job easier for you. But getting a tank full of bad gas can be even harder for you.
Using gloves is a great tool to protect your hands from damage. Bad gas can make you feel uncomfortable or uncomfortable, which can lead to reluctance to do so later. So try to use gloves before doing the work. However, it can be a great trick to protect your hand.
Related Questions About Fixing Your Motorcycle Bad gas
How Do You Know If Your Motorcycle Has Bad Gas?
Bad gas has some symptoms that you can easily identify with. It will be more convenient for you to be able to identify than to test again and again. Then below are some signs of bad gas.
- When bad gas accumulates, the motorcycle cannot be started easily.
- The purses of the motorcycle become rough. So you can’t run comfortably.
- The engines will continue to be damaged slowly, meaning they will not work normally.
- There may be more noise when running.
How Long Can Good Gas Be Converted To Bad Gas?
If gasoline is mixed with ethanol in the gas of your motorcycle, it is necessary to drain the gas within 30-40 days. This is because ethanol turns liquefied gas into bad gas in a humid environment. So take care and test what are the components of your gas.
Accordingly, you have to complete the gas drainage work. But it depends on the brand of your motorcycle, your driving skills, and so on.
Can Bad Gas Cause Motorcycles Not to Start?
Bad gas is a big reason why a motorcycle doesn’t start. This is because if the bad gas stays in the tank unnecessarily for more than 1 month, it will slowly start to become sticky. After 1-1.5 months, it will get damaged more and more. The possibility of starting the engine of the motorcycle is reduced. If varnish and glue accumulate in the bad gas, it can damage the motorcycle engine and cause any harm to it. So, it is clear that bad gas can cause a motorcycle not to start.
Does Seafoam Help With Bad Gas?
Seafoam keeps your motorcycle gas clean and oily. Surely it is an effective way of lubricating your bad gas. It eliminates the accumulation of bad gas in the oil. The importance of seafoam is invaluable for maintaining the entire fuel system. It balances varnish and glue in the bad gas. Also, seafoam is required to stabilize the fuel. So, pour seafoam into your bad gas tank. It helps seafoam with bad gas.
What Can Happen If You Don’t Clean The Bad Gas In Time?
When the bad gas is not cleaned at the right time, it can cause several problems. Such as:
- Motorcycle engines will be damaged gradually.
- There may be a lot of noise while riding a motorcycle.
- The engine may misfire, so be careful.
- You may not get the charm while riding a motorcycle.
- Your motorcycle cannot be started easily.
Conclusion
Hope you got a pretty good idea on how to fix bad gas in your motorcycle. You can inform in the comments section which of the above ways you have benefited the most.
You may also want to read:
Can You Increase Motorcycles Torque?
