Motorcycle grips are a crucial part of your bike, and they need to be grip-able to control the bike safely. However, if the grips slip, this can make the bike difficult to control, and you may end up crashing.
When I was a newbie rider, I faced this problem many times. This problem is very frustrating. But after many failures, I have learned how to get rid of this problem. And here you are going to read all these things that I have learned from my long experience.
However, stopping the motorcycle grips from slipping isn’t a big deal. There are some ways to stop a motorcycle grip from slipping. You have to perform one of them properly. I will guide you to perform those ways without mistake. So, without further ado, let’s get started.
5 Ways To Stop Motorcycle Grips From Slipping: Choose The Suitable One
Slide-on and lock-on are the two types of motorcycle grips. Both of them can slip. But lock-on grips slip rarely and slide-on grips slip most. Anyway, if you have a loose lock-on grip, fix number 3 is for you. Expect number 3, all of them will work for slide-on grip.
Hence, here are the 5 different ways to stop motorcycle grips from slipping.
Way-1: Use Grippy Gel
Most motorcycle grips are slippery because they use liquid rubber to form the gripping surfaces. One way to stop this is to apply a grippy gel between the handlebar and the grip. This will make it harder for the grip surface to slip and will keep you more in control of the bike.
Way-2: Use Hair Spray
Hair spray is another way to stop a motorcycle grip from slipping. Spray some hairspray on the handlebar and into the grip. After that, put the grip into the handlebar and leave for 30 minutes.
When you spray the grip with hair spray, it will form a cushion that will keep the grip surface in place. However, make sure you don’t spray too much hair spray, and it will make the grip slippery.
Way-3: Use A Grip Shaft Lock Ring
A grip shaft lock ring prevents the grip from slipping off the handlebars. It is easy to install and remove, so you can change your grips without having to take the bike apart.
Step-1: Loosen The Grip Ring
There are three things to loosen to stop grip slips. First, lose the Grip Ring. It is a disc-shaped component at the handlebar end of the grip. Then lose The Lock Ring. It is a circular component. Finally lose The Spur Gear, which helps the Grip Ring rotate.
Step-2: Replace The Grip Ring
Once the Lock Ring, Spur Gear, and Grip Ring have been removed, you can replace them with a New one [If needed]. Just unscrew the Old Grip Ring Lever and screw in the New one. Remember to tighten everything back up afterward.
Step-3: Re-Install The Handlebar End Cap
Finally, re-install the Handlebar End Cap to ensure that there are no loose parts around the Grip Ring Lever. Now that you know how to use a grip shaft lock ring, make sure to keep it in good condition so that it doesn’t slip during your ride.
Way-4: Using Spray paint
If you’re ever worried about your grip slipping, spray paint can also be used to prevent it from happening. Just apply a layer of paint to the inside of your grip, and then reattach it to the handlebar. Be sure not to get any overspray on the screws that hold it in place – this will undo your work.
Way-5: Using Glue
Glue is the common way to prevent a motorcycle grip from slipping. Glue is available in many forms. That’s why it’s ideal for different applications. Follow the following steps to perfectly glue the grips.
Step-1: Remove The Grip From The Handlebar
Start by removing the grip from the handlebar. Glue is a sticky substance, so you’ll need to be careful when handling it. If the glue has dried, heat some water and use a cloth to clean off any excess glue.
Step-2: Apply The Glue
Now that you have your grip free from the handlebar, apply the glue on the handlebar and into the grip. Be aware not to apply glue around the screws that hold it to the handlebar.
Step-3: Reattach The Grip And Handle Bar
When the glue is fully dried, reattach your grip using screws and a new handlebar end cap. Be sure to tighten everything securely in place! Congratulations – you’ve successfully installed a motorcycle grip lock ring.
5 Common Reasons For Slipping Your Motorcycle Grips:
Slipping hands from the grips is a dangerous issue when riding a motorcycle. You have to be very careful if you have this problem. There are some common reasons for slipping hands from the grips, these are:
1. Wet Hands:
Wet hands are one of the most common reasons for slipping grips from a motorcycle. Most of the time motorcycle riders live in a hurry. That’s why they forget to keep their hands dry. You should make sure to keep your hand dry throughout your ride.
2. Sweat:
Sweat is a common problem on long rides. It feels uncomfortable to grip with sweaty hands. You can reduce the amount of sweat that accumulates on your hands and arms by wearing a moisture-wicking shirt or using an antiperspirant.
3. Poorly Fitted Gloves:
If you wear a pair of poorly fitted gloves, it can cause a problem like slipping grips. Make sure to get good-quality gloves that fit comfortably on your hands so that you can grip the motorcycle handlebars firmly.
4. Worn Out Grips:
Worn-out grips can be the culprit behind grip slipping. You have to always take care of the motorcycle grips. If the grips are worn out, you have to replace the grips to ensure additional safety.
5. Weather Conditions:
Make sure to take appropriate precautions considering the weather condition. Because if you ride on a rainy day without a raincoat, the grip will surely slip. That’s why you should wear a raincoat or ride in a well-insulated motorcycle on rainy days.
3 Types Of Glue That You Can Use To Stop Motorcycle Grips From Slipping
Applying glue to stop motorcycle grip from slipping is a common way. But many people don’t know what type of glue they should use. There are many types of glue on the market. Here I am highlighting the best three of them:
1. Grip Glue:
There is special glue for grips. Most people consider this glue. Because it offers some key advantages. For one, this glue is stronger than regular liquid adhesives – so it can hold your grip even if it starts to slip. And because it dries quickly, you don’t have to worry about wait times while the adhesive sets.
2. Paste Glue:
Paste glues are a less common type of glue, but they’re gaining popularity among bike enthusiasts. They offer a bit more flexibility than liquid glues. So, you can often achieve better results by mixing and matching different types of paste adhesive.
3. Super Glue:
Super glue is a special type of glue that’s typically used for repairing broken bones. It’s powerful enough to hold most materials together, but it also has a quick drying time – so you can remove the grip lock ring quickly and without fuss.
5 Things To Consider When Buying A New Motorcycle Grip To Prevent Slipping:
When it comes to buying a new grip, most people choose the wrong one. That’s why their grips slip most. If you choose a grip wisely, it won’t slip easily. I think some things will help you to buy the best grip for your motorcycle. Here are five things to follow when buying a new motorcycle grip:
1. Pick The Right Size:
Grips come in different sizes, so make sure to choose one that fits properly on your motorcycle. If it’s too small, it will be uncomfortable and difficult to use. On the other hand, if the grip is too large, it could easily slip off of the handlebar.
2. Choose A Grip With A Locking Ring:
A locking ring prevents your grip from slipping off of the handlebar. This is a good option if you’re worried about your grip being easily removed or stolen.
3. Consider A Grip-Lock Ring:
A grip lock ring is a removable device that locks your grip onto the handlebar. This is a good option if you’re concerned about someone removing your grip without your permission.
4. Look For Grips With Anti-slip Properties:
Grips that have anti-slip properties will help to keep your hand secure while riding, regardless of the condition of the road or trail surface.
5. Tight The Screws:
Be sure to tighten all of the screws that hold your grip in place. This will help ensure that it remains securely attached to the handlebar. And always check the manufacturer’s instructions before installing a grip lock ring.
Related Questions:
How Can You Keep Your Motorcycle Grips From Slipping?
One of the most common causes of motorcycle grips slipping is moisture. The moisture can come from the rider’s sweat, rain, or even dew. To prevent this, always make sure to keep your motorcycle grips clean and dry.
If you do get wet, dry your grips as soon as possible with a cloth or a hairdryer. If the grips are still slipping, you may need to replace them.
Do Motorcycle Grips Need Glue?
Motorcycle grips do not typically require any type of glue, but some people prefer to glue them in place to ensure a more secure grip. Hairspray is a good replacement for glue.
When using hairspray as a grip adhesive, be sure to spray it directly onto the grip and then slide it on. Do not twist the grips if they have any type of design – this could cause the glue to loosen and the grip to become loose.
How Do You Glue Motorcycle Grips?
Start the process by cleaning the grip with a solvent such as acetone or denatured alcohol. Then you have to remove the dirt, wax, or other debris. Next, you need to apply a thin layer of glue into the grip and on the handlebar. Make sure that the glue is spread evenly and that the surface is clean.
Once the glue has dried, you can attach the grip to the handlebar using a screwdriver. Make sure that the grip is in the correct position and tighten the screw until it is secure.
How Do You Put On Motorcycle Grips Without Glue?
One of the common ways is using hair spray. Spray a little bit of hair spray on the handlebar and into the grip. Then leave it for 30 minutes. It will stop the grip slipping problem.
Another way is to use a grip tape that is pre-cut to fit specific motorcycle grips. This type of tape is also heat-sensitive, so it will conform to the grip and hold it in place.
If you are unable to find either of these types of grips, you can use a grip adhesive that is designed for this specific purpose. This adhesive is designed to have a short working time and be easy to remove.
How Do You Fix Loose Motorcycle Grips From Slipping?
If the grips are just loose, you can try to tighten them using a wrench or a socket. But when the grips are loose and coming off the handlebars, you will need to replace them. Replacement grips are available in a variety of styles and sizes, so it is important to find the right one for your bike.
If the grips are coming off in chunks, the glue that is used to hold the grip has likely failed. In this case, you will need to remove the grip and replace the glue with a stronger version. Finally, if the grip is just really loose, you may need to adjust the handlebar position.
How Do You Make Your Motorcycle Grips Stick?
You can use a grip adhesive that is designed specifically for this purpose. This type of adhesive has a short working time and can be easily removed. Another method is to use grip tape that is pre-cut to fit specific motorcycle grips. This type of tape will conform to the grip and hold it in place.
Finally, you can also try using hair spray or silicone adhesive to make the grip stick. These types of adhesives have a long working time and can be slightly more difficult to remove.
What Are The Downsides Of Oiling Your Motorcycle Grip?
One downside of using oil as a lubricant is that it can become slippery over time. This is especially true if the oil dries out or becomes contaminated. Furthermore, excess oil can cause build-up on the grip surfaces and lead to sticking and clogging. In extreme cases, this buildup may result in your grips coming off completely.
What Type Of Motorcycle Grips Should You Use To Avoid Slipping?
It depends on your riding style and preferences. Some riders prefer lock-on grips because they feel more secure while cruising down the road. On the other hand, slide-on grips are popular among riders who need to be able to easily adjust their grip when needed. However, slide-on grips are less likely to slip than lock-on grips.
Conclusion:
It feels very uncomfortable to ride with a slippery grip. Also, slippery grips can cause a terrible problem. That’s why you should always be aware of that. I hope now you know all these things.
Anyway, if you think I missed anything important or you have something on your mind, feel free to share them in the comment box. I will try to answer them.
You might be interested in:
How To Brake Motorcycles Without ABS Safely?
How To Fix a Speedometer On a Motorcycle?
How To Mount A Backpack On A Motorcycle?
