How To Take Off On A Motorcycle? [A Step-By-Step Guide]

How To Take Off On A Motorcycle

A traditional motorcycle or BMWs require control of the dry clutches to smoothly turn off their vehicles. But the majority of people often feel troubled to do so. The novice and the experts are sometimes annoyed about turning off the motorcycle properly. 

As a consequence, most of the bikers only rely on finding the friction zone and continue to pressurize the throttle to take off their motorcycles. But, is that the only way to take off on a motorcycle? Not at all.  

If you’re a new practitioner, this article will help you a lot. Here, I’m going to show you some of the common and safest ways to turn off your motorcycle in a proper way. I assure you after reading this article, you will be an expert in how to take off on a motorcycle safely.

6 Simple Steps To Take Off Smoothly & Safely On A Motorcycle:

To take off the motorcycle smoothly, you need to follow some rules appropriately. That’s why follow the below 6 simple steps adequately.

Step 1- Move The Motorcycle To The Spot For Parking It:

At first, you must learn about the proper way of moving the motorcycle on the spot. In our early biking career, we needed to take the bike on the spot by hand or sometimes pull it out of a nook in the garage. Again, you might be bringing the bike to the driveway to wash it, or maybe it isn’t rideable for one reason/another. 

Whatever it is, you must follow the instructions below whenever you’re going to handle the bike. 

  • Access the bike from your kickstand side, it is preferred by many experts;
  • Pull out the bike handlebar grip on your both hands; 
  • Make sure to get penetration to the front brake;
  • Bikes are usually too heavy and ponderous. So, once they get started, you need to tip in the opposite direction unless you might not have enough strength to stop it. 

That’s why you should lean the bikes towards you every time. 

Step 2- Turn Off The Ignition Switch While Giving One Round:

While you’re running onto the bike seat, it’s necessary to turn on and off the ignition switch as it is interlinked with a smooth turn-off. Hence, the switch feeds electricity to kill it towards the fuel pump.

Again, the ECU powered up the bike similarly to run it. Besides, the ignition switch has three critical keys – on, off, and lock position. 

  • Off position means all the electric circuits are apart from the root. The engine will shut down. The key can be removed.
  • On position means the ignition is completed, and the engine is being ready to fire. And the key can’t be repositioned or removed from the ignition switch in this position. 
  • Lock position means all the handlebars are positioned through the left. Next, push it down towards the OFF position and remove the key. 

So, run the ignition key properly whenever you’re getting a backward move onto the motorcycle. 

Step 3- Use The Killing Switch To Stop Or Balance The Bike In Danger:

Turning off or balancing the bike in danger is a holy grail to save you from any inconvenience. In that case, the bikes’ killswitch plays a vital role. A killing switch refers to turning off the engine a couple of times. That doesn’t mean the engine will be shutting down entirely. 

Turning on this switch will let your lights and gauges be blinked even when you’re absent or parking the bike. That also means that the switch only affects the fuel pump engine control. The remaining power of the key helps to load lights, horns, etc. 

So, you need to turn on this switch to control the bike balancing for emergency purposes. It is also vital to hand off the switch whenever you cannot control the bike speed. Just use the kill switch, and the engine will turn off. 

Step 4-Set The Ignition Key Switch On-Off Mode / Lay Down The Side Stand:

For this, turn on the ignition switch and set it ON. If you don’t have the ignition switch, use the side stand to turn on the bike. A side stand is an alternative to most bikes, known as a cut-off sensor. Turn the switch and let the engine shut off from being run. 

Step 5- Turn Off The Ignition Key & Kill Switch:

After shutting down the bike’s key, turn off the bike switch and kill the switch (black button) altogether to stop it. Again, raise the side stand if you have the stand sensor, otherwise, skip it. Keep your leg balanced before jumping through the bike.

Step 6- Find The Friction Zone & Turn On The Clutch 

It is mandatory while you’re moving onto the bike. Many of the guys are having trouble moving their bikes in the traffic. That is the point where friction zones work for you. No matter how many times you’re driving the motorcycle. Some menfolk usually find it difficult to control the bike throttle. 

There are simple tricks to find your comfort zone. Just keep your legs onto the bike’s handle then search for the comfortable sides. Remember your comfort zone refers to your friction zone.

After finding them out, slowly release your clutch lever. Afterward, you need to add a bit of throttle. And keep it up until you’re able to release the clutch a bit more. Then hold the clutches and move the bike forward to the turning point. 

Thus, you can turn off the bike and shut down the motorcycle properly. Keep in mind the good uses of some essential keys to the motorcycles. 

How To Take Off A Motorcycle Quickly Without Popping A Wheelie?

Another problem you may face is taking off the motorcycle quickly without popping a wheelie. It’s quite a straightforward step. Just follow the processes below one by one. 

Step 1- Set The Wheel Control:

First, keep your motorbike in a neutral position. Then set up the wheel control. Without setting or achieving the wheel control, do not leave the clutches. Otherwise, the clutches may slip or your control may go in vain. 

Step 2- Lean Your Bike Forward To Get Some Weight:

Now you need to lean the bike forward to get some weight on the front of the wheel. But keep in mind, you should not pressurize the clutch. Just let it feed the power of the engine at around half of the throttle. But do not open the throttle further until it is fully engaged. 

Step 3- Keep Your Leg Over The Brake Pedal & Start It:

Next, keep your leg over the brake pedal. Then apply your leg to lift the throttle. Once the wheel starts to move, lift it as well as for easy back on to the throttle. Lastly, lean it forward, and keep continuing to moderate the bike revs. 

Step 4- Roll The Bike & Start Gearing:

Once you’re done learning it, you need to roll the bike but it may be harder for you if there is an issue of lack of gasses. 

Now, try to roll out the bike and start gearing. Watch the wheelie for finding out the second gear too. It is crucial to smoothly run the bike over the road.

Overall, the main theme of all the turning off biking gear is to focus on the throttle. Whenever you’re switching onto the bike, keep trying to balance it. Only then you can successfully turn off the motorbike without popping.

Tips For Taking Off Quickly On A Motorcycle: Be A Pro

Below are some of the best tips for beginners to experts who want to be a master on a quick take-off motorcycle. There you also get some safety tips. 

  • Sit close to the seat whenever you’re in a high turn; 
  • Wear appropriate safety clothes and gear even if you’re a driver & passenger; 
  • Put on a safety helmet as it will give sufficient protection from the sudden injury to your face, skull, and head;
  • Another essential thing to consider is turning off the motorcycle ignition key safely;
  • And the little thing to consider is to avoid wearing a t-shirt as it will cut off in an accident. Leather is often best to wear, but if you can’t afford to buy them, you might pick out a jacket made with the thickest material;
  • Wear any protective pants before riding on the motorcycle back;
  • Choose the appropriate boots and footwear to press the peg and drive comfortably; 
  • Wear protective gloves for taking some damage off of your hands in an inconvenient accident;
  • Do not wiggle or shift the motorcycle unexpectedly, and try to move it properly;
  • Prepare for every turn and stop; 
  • Be an active participant;
  • Learn about how to turn back and properly forward the bike; 
  • Always take a soft U-turn while you’re in a crowd;  
  • Keep the bike always in a neutral position every time you turn it off.

Related Question  

How Do You Move Off A Motorcycle Smoothly? 

To move off a motorcycle smoothly, practice by starting from a stop, then slowly releasing the clutch lever. It will take overall 10 minutes to get you to that point. Next, give the throttle a turn, and slowly unease the clutch to remove it. Control the speed of the clutch, and look over the place where you want to go. Avoid the front part of the bike. 

Which Side Do You Need To Take Off A Motorcycle Bike? 

Riding on a motorcycle requires some skills and strategy. Before taking the motorcycle, you need to focus on where you want to turn over. Fix the place and leave your foot over it. Then always take care of moving forward to the roadside areas. So, keep dismounting the roadside and also the left part of the bike. 

How Should A Beginner Shift On A Bike? 

As a beginner, you can quickly shift on a bike by following specific rules. For this, squeeze the clutch lever in and ease it out quietly. Next, roll the throttle towards the back of the motorcycle to go faster. Afterward, roll out the throttle towards the back of the bike to let it lean or go slower. Finally, press down the gear shift to put the motorcycle into the first gear. Herein, anyone can safely get on the bike. 

How Do You Improve Your Clutch Control On The Motorcycle? 

Try to ride into a figure of 8 or slalom as slow as possible. Then use the clutch, throttle, and back brake to control it. Again, you must be determined not to put your feet on the ground. Try out to control the gears slower. Be confident and stable to slow riding, as it is just a skill that can become handy to almost all bikers after the time arrives. 

What Is The Best Way To Turn Off The Motorcycle? 

The best way of turning off the motorcycle relies on some affairs. Among them, the supply valve, auto ignition key, clutch types, etc. are the most common factors. However, for turning off your motorcycle rapidly, at first check out the ignition key switch. Also make sure your bike is well-balanced, well-positioned, and stands in a neutral position too. 

Then, turn on the ignition key, and you’ll see the red button which will give you a signal automatically. After that,  keep pressurizing the clutches, and move the bike throttle with your legs. Later on, while you need to turn off the bike, simply switch off the ignition key. That’s it, your bike will be stopped again. 


To gain mastery over the motorcycle take-off, you need to be strategic and possessive. The best way to master it is to practice thousands of times. In a word, my overall guidance on how to take off on a motorcycle may help you to gain fine throttle control. 

Besides, my provided steps are also safe. While you are taking off with your motorcycle, be careful and concern yourself with your safety first. Write to us if you still have any queries.

Recent Posts