A wrapped exhaust can save the motorcycle engine more. With this easiest tool, a user can easily prevent heat and temperature. Besides, motorcycle exhaust wrap can seem hard to use and manage. But trust me, it is the most effective and effortless tool to save the engine.
Choose any part of the exhaust and roll the wrapper over the surface. Make the patches tighten, and hold them with your hands. Furthermore, use safety wires to protect the starting point and the finishing line. Remember to soak the wrap in water completely.
In this exclusive content, I’ll tell you all about the exhaust wrap that is quite essential for all motorcycle users. Besides, as a reader, you will get some more tricks and tips to adjust the wrapper with the pipe perfectly.
Advantages Of Motorcycle Exhaust Wrap You Should Know:
Motorcycle exhaust wrap is an essential part of the regular health of the vehicle. If you want to enjoy a hassle-free and easy ride, exhaust wrapping will be the best way. Besides, wrapping the exhaust pipe increases the life of the vehicle gradually. Now, let’s check the amazing advantages of using motorcycle exhaust wrappers.
- Controls Engine’s Temperature:
When motorcycles run on the road, it creates heat continuously. High temperature decreases the engine’s working capability1. Besides, it makes the engine quite hot and damaged. The continuous use of this practice can harm the vehicle permanently. For this reason, motorcycle exhaust wrap is vital for any motorbike.
If the exhaust pipe is wrapped perfectly with the wrapper, it can prevent the excess heat from departure. As a result, the engine remains cool while running the whole vehicle. The machine doesn’t raise the temperature quickly. In this way, the exhaust wrappers control the engine’s temperature.
- Stores More Heat:
Exhaust wrappers can store excess heat from inside the engine. The heat balance is quite important to any machine. Generally, the burning fuels create heat after moving the vehicle. High heat makes the whole system weak. For this reason, the rider can face unusual issues with the motorcycles.
With proper wrapping, the exhaust pipe saves additional heat. That’s why the engine can move the vehicle without working more. The stored heat can properly support the machine and protect it from damage. If the exhaust pipe creates unnecessary issues, wrap the whole part with good wrappers.
- Increases Work Efficiency:
By using the exhaust wrapper, the user can increase the work efficiency2 of the motorcycle. All the engines follow the thermal laws of physics. According to these laws, high temperature creates more heat, and high heat decreases work efficiency. If the heat can’t skip from the engine, the engine never increases the temperature.
An exhaust wrapper creates an obstacle to relieving the heat outside. For this reason, the excess heat returns to the engine and works to grow the work capacity. Therefore, an exhaust wrapper is the best choice for motorcycle riders to get the highest work efficiency. In this case, an exhaust wrapper can be the only solution.
- Gives A Cool Appearance:
To upgrade the motorcycle’s old look, use an exhaust wrapper as an effective way. It provides an eye-catching appearance to the vehicle. If you want a cool look on the bike, a fancy exhaust wrapper will meet the demand completely. Hence, choose an exhaust wrapper for the dearest vehicle to enhance its appearance with great safety.
- Prevents Accidental Burning Issues:
Most of the time, riders have ankle-burning issues3 through exhaust pipes while riding the motorcycle. It can create serious burning injuries in the ankle areas during your riding period. Besides, the back seat carrier also faces severe burning because of extensive heat. However, an exhaust wrapper can save the rider and the transportation from all these burning issues.
An exhaust wrapper works like a protector for the rider. It defends the heat from departing and reduces the temperature of the exhaust pipe. For this reason, the outer part doesn’t hold too much heat. Wrap the exhaust pipe to prevent this kind of accidental burning.
- Easy To Manage And Use:
The best advantage of using a motorcycle exhaust wrapper is its easy management. With great ease, anyone can install this tool over the exhaust pipe. You don’t need any heavy and complicated tools to adjust the wrapper with the exhaust. Besides, the maintenance system is also effortless and manageable.
Exhaust wrappers last longer with the proper care and use system. If the exhaust pipe remains clean and rust-free, the wrapper doesn’t damage. Furthermore, the exhaust pipe needs adequate moisture and fraction to protect the heat from departure. A user can afford all of these things easily. That’s why exhaust wrap is quite effortless to manage and use.
6 Easy Steps To Wrap Motorcycle Exhaust Easily
Wrapping an exhaust pipe is so much easier. You can adjust it without any complex tools. Besides, it takes only a few minutes to change the exhaust. But the user must follow the proper rules to wrap the exhaust pipe to get the best result. Now, I’ll describe the six easiest steps to easily cover the motorcycle exhaust.
Step 1: Open The Head Shield
There is a stainless steel head shield over the exhaust. Open all the protectors and detach the head shield from the exhaust pipe. To wrap the part, you have to open the guard first. Now, use some screw removal coatings over the protectors. Furthermore, after a few minutes, the screw will become moveable.
Step 2: Remove The Exhaust
The exhaust pipe is always attached to the engine tightly. For this reason, you must use a screwdriver to open all the protectors. However, be careful about the protectors and the surface of the exhaust. Don’t put any scratches over the exhaust surface. Now, detach the exhaust pipe, and it will become ready to wrap with the wrappers.
Step 3: Wet The Wrappers
Before wrapping, the wrappers must soak in water. Liquid soaking will increase the fraction rate of the wrappers. For this reason, it will cover the exhaust surface tightly. Soak the wrappers under the water for a few minutes. Besides, check all the parts carefully to see if it becomes wet properly.
Step 4: Use Steel Wire To Adjust The Wrapper
Start to cover the wrapper from a single side of the exhaust. Use both hands to tighten the cover with the surface. However, the starting point can detach from the surface. For this reason, use stainless steel safety wire to adjust the starting point. Fasten the wire with the wrapper properly. SunplusTrade Metal Zip Ties can be the best option to change the cover.
Step 5: Wrap The Whole Exhaust
Generally, the exhaust pipe contains two parts. Start to wrap a single leg first and go for the other one. To get the perfect result, always choose a one or two-inch wrapper for the motorcycle exhaust. Besides, cover half of the previous wrapper with the next one. Through this method, the wrapper will keep the balance over the surface. Now, cover the whole exhaust completely.
Step 6: Seal The Finish Lines
After wrapping the whole pipe, seal the finish lines properly. This time also uses stainless steel safety wires to strengthen the finish lines. The exhaust will cover with the wrapper perfectly by sealing the finishing point. Otherwise, the wrapper only lasts for a short time.
10 Tips To Maintain Motorcycle Exhaust Wrap For Better Longevity:
If you use an exhaust wrapper, it will offer benefits for a long time. The old wrapper must be replaced with the new one after a certain period. However, some tricks can keep the exhaust wrapper strong for a long time. Below, I’ll share with the users some tips to maintain a motorcycle exhaust wrapper for better longevity.
Tip-1: Wet The Wrap Sometimes
Wet the wrapper with cold water sometimes. It keeps the wrapper balanced and maintains the fraction perfectly. For this reason, soak the exhaust wrap at least twice a week. Besides, you can use another liquid over the wrapper sometimes. However, never use oil to wet the wrapper.
Tip-2: Use Quality Coating For Wrapping
The coating is an optional ingredient to wrap the motorcycle exhaust. However, apply layers over the surface to provide extra support to the wrapper. The high-quality coating can hold the fraction for a long time. Besides, the coating can tighten the wrapper and be stronger than a regular one.
Tip-3: Leave The Wrapper To Cure
After covering the exhaust pipe, wait for at least ten minutes to adjust the wrapper with the surface. Sometimes, it can take more time to set the wrapper. When the wrapper becomes tight and strong, the motorcycle will be ready to ride for a long drive.
Tip-4: Never Wrap Over A Damaged Exhaust
The damaged and rusted exhaust can’t contain the proper fraction to hold the wrap over the surface. For this reason, before wrapping the pipe, check the exterior. If there is any rust, dirt, or damage, clean and heal the place with a soft cloth. Now, the exhaust is perfectly ready to cover with the wrapper.
Tip-5: Spray The Wrapper In A High Temperature
If you want to use any coat over the wrapper cloth, spray the surface at a high temperature. Provide high heat and spray the coating properly all around the wrapper cloth. Generally, high temperatures can help the fabric to stay tightly over the exhaust surface.
Tip-6: Use Plastic Bag To Prevent Rust
The exhaust pipe can be rusted after soaking in the water. However, by covering it with a plastic cover, the air can’t reach the water and make rust over the surface. Hence, use a large plastic bag or cover to prevent rust easily. A plastic cover over the exhaust wrapper makes the long-lasting wrapper material.
Tip-7: Always Choose Leather Wrapper For Exhaust
There are two types of exhaust wrappers4 available in the market. Fabric wrappers are quite affordable and easy to manage. On the other hand, leather wrappers are expensive.
However, these leather wrappers last for a long time without any hassle. Besides, leather wrappers are also easy to use. Choose a leather wrapper for the motorcycle exhaust pipe.
Tip-8: Wrap The Exhaust Tightly
While wrapping the exhaust, always keep the steps tight and strong. The strength of the wrapper depends on every patch. If the patches are fast and strong, the whole wrapping will last long and have potential. Besides, the tight patch is challenging to detach from the exhaust surface.
Tip-9: Use Good Painting Coats
Some motorcycle owners prefer painting over the exhaust wrap. It makes the pipe more colorful and gorgeous. Hence, keep the head shield over the wrapper if you want to paint the exhaust cover. Also, always use good painting products to paint the surface.
Tip-10: Apply Heat Over The Wrap Sometimes
Most of the time, the exhaust wrap becomes damaged because of rusting. Too much air and moisture are the only ones responsible for this situation. For this reason, apply heat over the wrap for a few minutes to prevent rust and other major damages. It removes extra moisture and air from the inside of the wrapper.
4 Major Troubleshooting Of Motorcycle Exhaust Wrap:
Motorcycle exhaust wrap becomes an essential part of getting safe riding. However, there are some major issues with exhaust wrap. These issues can be solved at home with proper maintenance without professional help. Here, I’ve given four major problems with the accurate troubleshooting of motorcycle exhaust wrap. Follow these tricks whenever you face these common issues with the bike.
| Problem | Reason | Solution | Prevention |
| Backfiring | Loose exhaust. | Use extra nuts, fittings, or protectors to adjust the exhaust and the header. | Change the old nuts after a certain period or protect the fittings from rusting. |
| Discoloring | Too much moisture and air. | Change the discolored wrapper or use a leather wrapper to avoid discoloring. | Cover the wrapper with plastic or waterproof fabric for a long time. |
| Losing patches | Lacking strength. | Use steel safety wires to fix and tighten the patches. | Apply proper force and pressure while covering the surface with the wrapper. |
| Damaging | Too much force. | Coat the whole wrapper with high-quality adhesive. | Only apply a little pressure while wrapping the exhaust. |
Related Questions:
Should Motorcycle Exhaust Be Wrapped?
The motorcycle exhaust should be wrapped properly. An exhaust wrap can keep the heat inside. For this reason, the engine can control the temperature low. With a low temperature, the machine can give the best performance. Besides, the exhaust wrapper also provides some more benefits to the rider.
Moreover, the rider can resist burning issues while riding the bike through an exhaust wrapper. It reduces the outside heat of the pipe and makes the exhaust cool. Furthermore, a wrapper can protect the exhaust from rusting and other damage. Hence, use a wrapper over the surface to keep the exhaust heat free.
Are Exhaust Wraps Worth It?
Exhaust wraps are worth covering the exhaust pipe. It can make riding more safe and easy. Besides, a muffler wrap can increase the work efficiency of the vehicle’s engine. For this reason, everyone should wrap the exhaust with a perfect wrapper. This method is quite easy and manageable.
Leather mufflers can suit any rider. These covers are durable and also elegant. Besides, some fabric wrappers provide more support to the exhaust pipe. Therefore, an exhaust wrap becomes essential to any vehicle for better riding.
Can You Wrap Vinyl On A Motorcycle Exhaust?
You can’t wrap the motorcycle exhaust with vinyl. Generally, vinyl doesn’t resist heat and melt at low temperatures. For this reason, if the exhaust pipe is covered with vinyl, it dissolves after a few minutes. Hence, wrapping the exhaust pipe with vinyl can create unwanted issues.
Besides, the vinyl wrapper doesn’t support the exhaust properly. It relieves the heat outside and can’t help the engine to increase the work capacity. That’s why the machine raises the temperature and becomes hot. However, a vinyl wrapper can give the surface a colorful look. It is better to avoid vinyl to wrap the exhaust pipe.
How Much Does It Cost To Wrap Motorcycle Exhaust?
Generally, it costs 20-100$ to wrap a motorcycle exhaust. However, the cost depends on various factors. It varies according to the company, design, material, and other qualities. Almost every company tries to keep the price low for general users.
The wrapping process is quite easy and manageable. Even the wrapper can arrange with the surface by following some easiest steps. Furthermore, the necessary tools are also available and affordable for the users. Besides, the users can skip paying for any extra tools to set the wrapper.
What Is The Best Motorcycle Exhaust Wrap?
SunplusTrade Black Exhaust Heat Wrap and LEDAUT Titanium Exhaust Heat Wrap Roll are the best motorcycle exhaust wrappers. These mufflers can protect the exhaust pipe properly. Besides, both of the wrappers can create enough fractions. With these products, the user will get a durable service.
High-quality wrappers provide the best services for a long time. However, some more brands and companies produce excellent exhaust wrappers. With these suggested covers, the user can resist heat and protect the engine without hassle.
How Long Do Exhaust Wraps Last?
The exhaust wraps last for at least three or five years after covering the pipe completely. With proper care and using methods, a user can use this wrap for more time. Besides, the wraps can prevent heat and temperature like the new one, even if it becomes old.
On the other hand, some other wraps are made from leather. These wraps can cover the exhaust pipe and protect it from any damage. Furthermore, leather wraps don’t become damaged or rusted easily. Hence, an exhaust wrap will be the best choice for better safety and protection.
Final Verdict:
Motorcycle exhaust wrap is the only way to keep the engine cool and efficient. However, it creates a lot of heat and increases the engine’s temperature. A wrapper can solve this issue without any hassle. For this reason, it is essential to know the proper installation method.
With the proper using method, an exhaust wrap can provide the best services for years. Hope this entire content will help you to fix the exhaust pipe with the new wrappers. Share the experience with me through the comment section!
References
- Daimler, G. (n.d.). Motorcycle engine. Wikipedia. Retrieved November 21, 2022, from https://en.wikipedia.org/wiki/Motorcycle_engine
- P. Brito, Martins, Goncalves, Sousa, F. J. L.M.,. R. (2012, 04 16). Temperature Controlled Exhaust Heat Thermoelectric Generation. SAE. https://doi.org/10.4271/2012-01-1214
- Miller, B. (2019, December 18). 16 Major Pros and Cons of a Motorcycle Header Wrap. Green Garage. Retrieved November 21, 2022, from https://greengarageblog.org/16-major-pros-and-cons-of-a-motorcycle-header-wrap
- Vehicle Wrap- How Can It Benefit Your Business – Commerce Revolution. (2021, October 29). Commerce Revolution -. Retrieved November 21, 2022, from https://www.engagementworld.org/vehicle-wrap-how-can-it-benefit-your-business/
